HOME   |   CONTACT
 
  SUREGRIP ANTI-SLIP CLEATS
Dimensions
600mm, 900mm or 1200mm long x 150mm deep

Colour
Black or Yellow

Anti-slip Grade
Pedestrian or Industrial


SUREGRIP ANTI-SLIP PANELS
Dimensions
3.2m x 1.25m or made to measure

Colour
Black or Yellow

Anti-slip Grade
Pedestrian or Industrial


1. FIBREGLASS BASE
SureGrip is manufactured using GRP as the base. All the following data refers to the GRP sheets. They are manufactured from thermosetting polyester resins and reinforced with glass fibre. A polyester film is applied to the external surface during manufacture for increased weather resistance. The GRP sheets are robust and shatter resistant. They will not soften or become brittle when exposed to high or low temperatures, incorporate UV light stabilisers, fire retardants and diffusing additives and comply with BS4154 "Corrugated Plastic Transluscent Sheets made from Thermosetting Polyester Resins"

Structural and Mechanical - Typical Values

Tensile Strength
BS 2782 Part 3 85N/mm2

Flexural Strength
BS 2782 Part 3 200N/mm2

Flexural (Bending) Modulus
BS 2782 Part 3 5.0KN/mm2

Bolt Shear
BS 4154 500N at Nominal 1mm Thickness

Impact Strength
Izod J/mm Notch 0.5

Hardness
Brinell 30


Physical Properties

Operating Temperatures: -20°C to 100 + °C

Thermal Conductivity (K): Lee's Disc: 0.15W/m °C

Thermal Movement: Coeffiecient of Linear Expansion: 25 x 10-6 per °C

Biological: Resistant to attack by micro-organisms, fungi, larvae, insects and mildew

Compatibility: No chemical reaction with other established construction materials

The GRP substrate has a life expectancy of at least 30 years


2. AGGREGATE
The aggregate used to create the anti-slip surface of SureGrip is black silicon carbide to provide a tough and durable grip with a long lifespan.

Chemical Analysis
Typical chemical analysis conducted on a 60 mesh grit.

Compound/Element, Chemical Formula & Typical Content
Silicon Carbide (Sic) 98.50 - 97.50% Maximum
Free Silicon (Si) 00.50% Maximum
Silica (SiO2) 01.00% Maximum
Free Carbon (C) 00.30% Maximum
Iron - Surface (Fe2O3) 00.10% Maximum
Aluminium Oxide (Al2O3) 00.20% Maximum

Hardness = 9.0 Mohs


3. RESIN
Isophtalic resin with good chemical resistant properties is used to seal the surface of SureGrip ensuring that the silicon carbide aggregate can not become detached from the GRP sheet. The resin is compatible with the resins used in the manufacture of the GRP sheet to ensure that delamination can never occur.

Chemical - % - Max working temp at which the isophthalic resin can be used (°C)

Acetic acid: 10% 60, 25% 40, 50% 20
Acetone: 10% 25°C
Acriflavine: 2% 50°C
Acrylonitrile

Alcohols:
Amyl: 100% 40°C
Butyl: 100% 35°C
Ethyl: 100% 30°C
Methyl: 100% 30°C

Aluminium: Chloride SAT 55°C
Aluminium: Nitrate 10% 60°C
Aluminium: Potassium SAT 60°C
Aluminium: Sulp hate SAT 65°C
Ammonium: Bromate SAT 40°C
Ammonium: Carbonate 5% 40°C
Ammonium: Chloride 50% 60°C, SAT 60°C
Ammonium: Citrate SAT 50°C
Ammonium: Nitrate SAT 60°C
Ammonium: Sulphate SAT 65°C
Amyl Acetate: 100% 20°C
Antimony Trychloride: 100% 20°C

Aviation Fuel:
AVTAG/JP4: 100% 20°C
AVTUR: 100% 25°C

Barium Chloride: SAT 60°C
Benzoic acid: SAT 60°C
Boric acid: SAT 60°C
Brine: - 60°C
Calcium Chloride: SAT 60°C
Calcium Hydroxide: 20% 30°C
Calcium Nitrate: SAT 60°C
Calcium Sulphate: SAT 60°C
Carbonic acid: SAT 60°C
Carbon Tetrachloride: 100% 20°C
Chloroacetic acid: 25% 20°C
Chlorine Water: SAT 25°C
Chromic acid: 10% 40°C, 20% 20°C, 50% 20°C
Citric acid: SAT 60°C
Copper Chloride: SAT 60°C
Copper Cyanide: SAT 60°C
Copper Sulphate: SAT 60°C
Cyclohexanol: 100% 40°C
Diesel Fuel: 100% 40°C
Diethylene Glycol: 100% 60°C
Dimethyl Phthalate: 100% 50°C
Dipropylene Glycol: 100% 60°C
Ethylene Chlorohydrin: 50% 60°C, 100% 60°C
Ethylene Glycol: 100% 60°C
Ferric Chloride: SAT 60°C
Ferric Nitrate: SAT 60°C
Ferric Sulphate: SAT 60°C
Ferrous Sulphate: SAT 0°C
Formaldehyde: 10% 60°C
Formic acid: 20% 50°C, 50% 40°C
Glycerol: 00% 60°C
Heptane: 100% 30°C
Hexane: 100% 30°C
Hydrobromic acid: 20% 60°C, 48% 50°C
Hydrochloric acid: 10% 60°C, 25% 50°C, 35% 30°C
Hydrofluoric acid: 10% 25°C
Hydrogen Chloride Gas: 100% 60°C
Hydrogen Peroxide: 20 VOL 30°C
Hydrogen Sulphide Gas: 100% 50°C
Iso-Octane: 100% 30°C
Isopropyl Alcohol: 100% 20°C
Kerosene (Domestic): 100% 40°C
Lactic acid: 50% 60°C
Lanolin: 100% 55°C
Lead Acetate: SAT 60°C
Lead Nitrate: SAT 60°C
Linseed oil: 100% 80°C
Lubricating oil: 100% 60°C
Magnesium Carbonate: SAT 60°C
Magnesium Chloride: SAT 60°C
Magnesium Nitrate: SAT 60°C
Magnesium Sulphate: SAT 60°C
Maleic acid: SAT 60°C
Mineral oil: 100% 50°C
< /span>Naphtha: 100% 35°C
Naphthalene: 100% 50°C
Nickel Chloride: SAT 60°C
Nickel Nitrate: SAT 60°C
Nickel Sulphate: SAT 60°C
Nitric acid: 5% 50°C, 10% 40°C
Oleic acid: 100% 60°C
Oxalic acid: SAT 55°C
Paraffin Wax: 100% 65°C
Phosphoric acid: 50% 60°C, 85% 60°C
Phthalic acid: SAT 55°C
Potassium Carbonate: 10% 20°C
Potassium Chloride: SAT 60°C
Potassium Chromate: SAT 60°C
Potassium Ferricyanide: SAT 60°C
Potassium Ferrocyanide: SAT 60°C
Potassium Permanganate: SAT 20°C
Potassium Phosphate: SAT 60°C
Potassium Sulphate: SAT 60°C
Propylene Glycol: 100% 60°C
Silicone oils: 100% 65°C
Silver Nitrate: SAT 30°C
Sodium Acetate: SAT 60°C
Sodium Bicarbonate: SAT 60°C
Sodium Carbonate: 10% 25°C, 25% 20°C
Sodium Chloride: SAT 60°C
Sodium Ferricyanide: SAT 60°C
Sodium Nitrate: SAT 60°C
Sodium Nitrite: SAT 60°C
Sodium Perborate: SAT 60°C
Sodium Perchlorate: SAT 60°C
Sodium Phosphate: SAT 60°C
Sodium Sulphate: SAT 65°C
Sodium Sulphide: SAT 65°C
Sodium Sulphite: SAT 65°C
Sodium Thiosulphate: SAT 60°C
Stannous Chloride: SAT 60°C
Stearic acid: - 60°C
Sulphuric acid: 25% 60°C, 50% 60°C
Tannic acid: SAT 60°C
Tartaric acid: SAT 60°C
Toluene: 100% 20°C
Turpentine: 100% 20°C
Urea: 2% 40°C
Urine: - 30°C

Water
De-Ionised: 100% 55°C
Sea: 100% 60°C

White Spirit: 100% 35°C
Zinc Chloride: SAT 60°C
Zinc Nitrate: SAT 60°C
Zinc Sulphate: SAT 60°C

Monomer Content: 43%
Viscosity @ 25°C: 4.5d Pas
Gel Time: 12 mins*
Heat Deflection Temperature: 90°C
Flexural Strength: 100 MPa
Tensile Strength: 65 MPa
Elongation 1.3%
Barcol Hardness: 45-50

Mechanical properties measured on unreinforced resin casts following post curing.

* Gel time tests were carried out using medium activity Methyl Ethyl Ketone Peroxide solution at 2% @ 20°C.