The principle benefit of the Ecotile system is the speed and ease of installation. The tiles can be laid over any hard surface even if it is damp, uneven or contaminated with oil, grease etc. You do not need any floor laying experience as the tiles are just hammered together using a rubber mallet or engineering hammer. Cut the tiles up to walls or fixed points using either a Stanley knife (we recommend using a concave blade), a table saw or jigsaw preferably with a coarse wood blade.

The following 9 stage process should ensure trouble free installation.
1. Remove as much free standing equipment from the work area as possible.
2. Sweep the floor to remove any debris.
3. Fill in any significant cracks or holes but don ’ t worry about the floor being uneven as the
tiles will follow the contours of the floor.
4. Start installation as close to the centre of the room as possible. If you want to use ramps in a doorway simply lay a line of tiles from the centre of the floor to the door and adjust the starting point to allow the ramp to sit in the desired finishing position.
5. Lay the tiles working out from the centre of the room in a circular fashion towards the walls.
6. Once all the full sized tiles have been fitted allow the tiles to settle for 12 to 24 hours before cutting the tiles up to the walls. This is not essential but will help ensure that you leave a large enough expansion gap.
7. Cut the tiles up against the wall or fixed point leaving at least a 5mm expansion gap.
8. If required the expansion gap can be covered with our PVC skirting or filled in with a flexible polyurethane mastic.
9. Your floor is complete and ready to use!

USEFUL LINKS
The following links provide more detailed installation instructions and cleaning recommendations.
1. Installation demonstration using time lapse photography
2. Installation & cleaning Instructions - industrial
3. Installation & cleaning instructions - domestic
4. FAQ's
5. Technical information
6. Data Sheets

For more information call 0870 7772795 or email us at info@versatileflooring.co.uk