HOME   |   CONTACT   |   INSTALLATIONS   |   FAQ's
 
 
  Constat is an injection moulded floor tile with 48 dovetail joints on the four external edges that have been designed to interlock together to create a tough and flexible floor covering. The tiles are manufactured from PVC compound up to 50% of which is recycled.


Product Description – Tiles

Manufacturing: Injection Moulding

Material: PVC (up to 50% recycled)

Thickness: 7mm

Tile Dimensions: 500mm x 500mm

Floor Area Covered Per Tile: 490mm x 490mm

Floor Area Covered Per 4 Tiles: 0.96m2

Weight: 8.0kg/m2

Hardness: 72 - 74 shore A

Surface Texture: Embossed

Colour: Light Grey

Ecotile’s new and patented technique involves adding tiny stainless steel fibres to the PVC base material at the point of manufacture to produce a permanent anti-static / conductive floor. The PVC base material containing the metal fibres is then injection moulded into the tooling to form the anti-static and conductive 500mm x 500mm interlocking floor tile.

The metal fibres are evenly and consistently distributed throughout the PVC resulting in both the surface resistivity and the overall resistivity of the tile surface being significantly reduced and in an improved ability to dissipate an electrostatic charge. This method also guarantees that the anti-static properties of the tiles will not decrease or fail over time.

Features Performance
Personnel Safety / Resistance to ground (protection from electric shock)
 > 7.5 x 105 Ohm
Protection to 100V device sensitivity
(person to ground maximum resistance)
 < 3.5 x 107 Ohm Tested at 100V
Floor Surface to Ground Resistance / Volume Resistivity * (typical average)
 < 2.3 x 105 Ohm
Maximum Surface Resistance
 6.7 x 109 Ohm
Charging of test subject during running test
 1.1 kV
Product Guarantee
 20 years
Guarantee for ESD Performance
 Lifetime
(* A conductive strip is required to earth the tiles, one earth point required per 30m2 of floor area to be covered or one earth point per section of tiles installed (which ever is the lower)